Browse Standards
IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV
The most common shield/sheath-bonding systems now in use on medium through extra high-voltage (5 kV to 500 kV) single-conductor shielded power cables and the methods of calculating the corresponding shield/sheath voltages and currents, when...
IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities - Redline
Basic requirements, direction, and methods for qualifying Class lE connection assemblies for service in nuclear power generating stations and otherre nuclear facilities are provided in this standard. These requirements include connectors, t...
IEEE Trial-Use Standard Criteria for the Design of the Control Room Complex for a Nuclear Power Generating Station
This standard addresses the central control room of a nuclear power generating station and the overall complex in which this room is housed. The purpose of this standard is to provide guidance for the design of the nuclear power plant contr...
IEEE Guide on Conductor Self-Damping Measurements
With the increasing interest and concern regarding the vibration of overhead conductors, and the emphasis on the improvement of existing methods and the development of new techniques for controlling the problem, there is a growing requireme...
Recommended Practice for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems
This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipmen...
IEEE Standard Criteria and Guidelines for the Laboratory Measurement and Reporting of Fly Ash Resistivity
Uniform criteria and guidelines for laboratory measurement and reporting of fly ash resistivity data obtained in the laboratory are presented. Fly ashes produced from the burning of any rank of coal are covered. Methods for ashing core bore...
IEEE Standard for Electrothermic Power Meters
Withdrawn Standard. Withdrawn Date: Dec 06, 1990. This standard applies to electrotherremic power meters as complete instruments and to their constituent parts: electrotherremic elements, electrotherremic units, and electrotherremic power i...
IEEE Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines
Definitions and usage of terms used in the measurement and analysis of corona and field effects of overhead power lines are presented in this standard. Correlation between measurements from equipment to standard terms is defined. Weather co...
IEEE Low Voltage AC Integrally Fused Power Circuit Breakers
This standard applies to enclosed low-voltage ac power circuit breakers as described in American National Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures, C37.13-1973 (IEEE Std 20-1973), except that the circuit breaker...
IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations
Qualification methods for Class 1E vented lead acid batteries and racks to be used in nuclear power generating stations outside primary containment are described in this standard. Qualifications required by IEEE Std 308 can be demonstrated ...