Browse Standards
IEEE Standard Parallel Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
The CAMAC parallel highway interface system for interconnecting up to seven CAMAC crates (or other devices) and a system controller is defined. In particular, the signals, timing, and logical organization of the connections from crate contr...
IEEE Standard Serial Highway Interface System (CAMAC) (Computer Automated Measurement and Control)
A serial highway (SH) system using byte-organized messages and configured as a unidirectional loop, to which are connected a system controller and up to sixty-two CAMAC crate assemblies, is defined. In the primary application, the controlle...
IEEE Standard for Insulation Shields on Medium-Voltage (15 kV - 35 kV) Cable Joints and Separable Connectors - Redline
Design tests for shield resistance, simulated touch current, and a simulated fault-current initiation for insulation shields used on cable accessories, specifi cally 15 kV through 35 kV class joints, and separable insulated connectors are c...
IEEE Cable Plowing Guide
Methods used to place cable underground vary widely. The choice of method depends on such factors as soil conditions, surface and subsurface obstructions, total footage to be installed, spacing between taps or splices, joint trenching pract...
IEEE Guide for AC Motor Protection
This application guide for the relay protection of squirrel-cage and wound-rotor induction motors and synchronous motors presents a review of the generally accepted forms of motor protection and summarizes the use of relays and devices, sin...
IEEE standard definitions of laser-maser terms
This list of standard laser-maser terms had its inception in the work of Subcommittee 28.7 of the IEEE Standards Committee. For various reasons work on these standards was suspended for a time. In 1970, with agreement of the Groups on Elect...
IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)
This standard is intended to serve as a basis for a range of modular instrumentation capable of interfacing transducers and other devices to digital controllers for data and control. It consists of mechanical standards and signal standards ...
IEEE Standard Definitions, Symbols, and Characterization of Metal-Nitride-Oxide Field-Effect Transistors
IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations and Other Nuclear Facilities - Redline
The minimum acceptable requirements for the performance of reliability analyses for safety systems when used to address the reliability considerations discussed in industry standards and guidelines are set forth in this standard. The requir...
IEEE Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications
A guide for installing, splicing, terminating, and field proof testing of cable systems in industrial and commercial applications is provided. It is not intended to be a design document,although many of the problems of installation can be a...