Browse Standards
IEEE Guide for Safety Specification of Laser Transmission in High-Power Industrial Laser Systems
This guide recommends safety measures that should be taken to help keep passive optical elements and optical fiber cables used in high power industrial laser systems from being affected by optical, opto-machines, and related effects are rec...
IEEE Guide for Parameter Requirements and Test Method for Industrial Fiber Laser
The required parameters that should be included in an industrial fiber laser product, such as the terminology, classification, and test method for fiber laser products are specified in this guide. This guide is intended to be used by fiber-...
IEEE Standard for Service Interoperability in Ethernet Passive Optical Networks (SIEPON) - Redline
The system-level requirements needed to ensure service-level, multi-vendor interoperability of Ethernet Passive Optical Network (EPON) equipment is described. The existing IEEE 802.3 and IEEE 802.1 standards, which ensure the interoperabili...
IEEE Standard for Camera Phone Image Quality (CPIQ) - Redline
Quantifying the performance of camera-equipped mobile devices is covered in this standard, with an emphasis on metrics and procedures appropriate to the types of sensors, lenses, and signal processing routines present on such devices. It is...
IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers
This document includes a definition of the concept of modulation frequencies for light-emitting diodes (LEDs), a discussion on their applications to LED lighting, a description of LED lighting applications in which modulation frequencies po...
IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems - Redline
This guide is specifically prepared for a PV/engine generator hybrid power system, but may also be applicable to all hybrid power systems where there is at least one renewable power source, such as PV, and a dispatchable power source, such ...
IEEE Recommended Practice for Network Communication in Electric Power Substations - Redline
Recommended practices for communication and interoperation of devices connected on an electric power substation Internet Protocol (IP) network are provided. An introduction to the concepts that need to be mastered as well as specific recomm...
IEEE Standard for Testing and Performance for Optical Phase Conductor (OPPC) for Use on Electrical Utility Power Lines
The performance, test requirements, procedures, and acceptance criteria for an OPPC are covered in this standard. Optical phase conductor (OPPC) is a phase conductor with optical fibers for telecommunication purposes. Functional requirement...
IEEE Standard for Helically-Applied Fiber Optic Cable Systems (WRAP) for Use on Overhead Utility Lines
An all-dielectric fiber optic cable (WRAP) designed to be helically wrapped around a conductor or other messenger on overhead power facilities is covered by this standard.
IEEE Standard for Qualifying Hardware for Helically-Applied Fiber Optic Cable System (WRAP Cable)
Performance and testing specifications for hardware used on helically-applied cable systems (WRAP) in order to standardize testing, simplify procurement specifications, and improve product quality is established in this standard.