Browse Standards
IEEE Guide for the Application, Maintenance, and Evaluation of Room-Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
The various important aspects that need to be considered for satisfactory long-term performance of room-temperature vulcanizing (RTV) silicone rubber high-voltage insulator coatings (HVIC) are outlined in the guide. Methods of application, ...
IEEE Guide for Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
Test procedures for evaluating the physical characteristics of cable-cleaning solvents and their compatibility with extruded dielectric cable components and cable accessories (joints and terminations) are provided in this guide. Compatibili...
IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded-Case Circuit Breakers for Industrial Applications - Redline
A recommended procedure for the selection, application, and determination of the remaining life in molded-case circuit breaker is provided.
IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery
A review of the nature of partial discharge in machine windings, how it can be measured under both off-line and on-line conditions, how it can be measured for individual form wound coils or bars, and the significance and limitations of the ...
IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations
This guide, covering three-phase ac systems from 1 kV to 800 kV, provides recommended electrical operating, safety clearances, and insulation levels in air-insulated electric supply substations; addresses insulation coordination procedures;...
IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV - Redline
Recommendations for the connection of gas-insulated substation to another gas-insulated substation of a different make or design are given. IEEE Std 1416TM is replaced by this recommended practice.
IEEE Guide for the Use of Gas-in-Fluid Analysis for Paper and Laminated Paper-Polypropylene Insulated Cable Systems - Redline
The application of the analysis of gases dissolved in the fluids of fluid-filled cable systems is discussed in this standard with respect to the procedures for sampling, obtaining the dissolved gas data, and analyzing the results.
IEEE Guide for the Application of Insulation Coordination - Redline
The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. Methods for insulation coordination of different air-insulated systems like transmission lines and substati...
IEEE Standard for Insulation Coordination - Definitions, Principles, and Rules
In this IEEE standard the procedure for selection of the withstand voltages for equipment phase-to-ground and phase-to-phase insulation systems is specified. A list of standard insulation levels, based on the voltage stress to which the equ...
IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
The electrical, mechanical, and physical requirements of oil-immersed and dry-type air-core smoothing reactors and dry-type air-core converter reactors for high-voltage direct current (HVDC) applications are specified. Test code is defined ...