Browse Standards
AIEE Proposed Recommended Practice for Medium-Voltage Motor Controllers for Rubber and Plastics Industries
The provisions of this Recommended Practice apply to the construction and application of controllers for alternating-current motors in the medium-voltage classification (601 to 5,000 volts). Although many of the specifications herein have b...
IEEE Recommended Practice for Impulse Voltage Tests on Insulated Cables and Their Accessories - Redline
A recommended practice for impulse testing of insulated cables and their accessories is described. The intention is to supplement insulated cable and their accessory standards by providing specific procedures for impulse testing on specific...
AIEE Specifications of 30 percent Rubber Insulation for Wire and Cable for General Purposes
These specifications apply to the insulation of electric wire and cable of the grade known as 30 per cent Hevea rubber.
AIEE Standard for Semiconductor Rectifier Components
Definitions given herein apply specifically to semiconductor components used for rectification or control of electric power, or both. For the purpose of this standard, a semiconductor rectifier component is a semiconductor rectifier cell, r...
IEEE Guide for Insulation Maintenance of Electric Machines - Redline
This insulation maintenance guide is applicable to rotating electric machines rated from 35 kVA and higher. The procedures detailed herein may also be useful for insulation maintenance of other types of machines.
IEEE Standard, Test Code, and Recommended Practice for Induction and Dielectric Heating Equipment
High-frequency heating equipments divide into two main types: (1) those used for dielectric heating, and(2) those used for induction heating. The induction heating equipments again divide into seven types: (1) commercial power line; (2) rot...
AIEE Proposed Guide for Operation and Maintenance of Dry Transformers with Class B Insulation
This guide covers general recommendations for the operation and maintenance of indoor, openly-ventilated, dry type distribution and power transformers with Class B insulation in ratings above 50 kva and above 600 volts, cooled by natural dr...
IEEE Guiding Principles for Dielectric Tests
The service record of electric equipment depends largely upon the performance of its insulation. Insulation failures result from various combinations of such causes as progressive aging, moisture, mechanical damage, excess temperature, chem...
AIEE Hard Drawn Aluminum Conductors Physical and Electrical Properties
The standards of this section cover the electrical and related properties of standard hard drawn aluminum conductors. The following shall be taken as normal values for standard hard drawn aluminum conductors.
IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery - Redline
The dc voltage tests procedures for the measurement of the insulation resistance and polarization index of insulated stator, and rotor windings and how to interpret the results are described in this recommended practice.