Browse Standards
IEEE/AIEE Test Procedure for Evaluation of the Thermal Stability of Enameled Wire in Air
IEEE Guide for Insulation Maintenance of Electric Machines - Redline
This insulation maintenance guide is applicable to rotating electric machines rated from 35 kVA and higher. The procedures detailed herein may also be useful for insulation maintenance of other types of machines.
IEEE Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment
Although the standard permissible operating temperatures of various types of equipment are different for one reason or another, this causes little or no difficulty except where two kinds of equipment with different temperature limits connec...
IEEE Standard, Test Code, and Recommended Practice for Induction and Dielectric Heating Equipment
High-frequency heating equipments divide into two main types: (1) those used for dielectric heating, and(2) those used for induction heating. The induction heating equipments again divide into seven types: (1) commercial power line; (2) rot...
AIEE Proposed Guide for Operation and Maintenance of Dry Transformers with Class B Insulation
This guide covers general recommendations for the operation and maintenance of indoor, openly-ventilated, dry type distribution and power transformers with Class B insulation in ratings above 50 kva and above 600 volts, cooled by natural dr...
AIEE Application Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
It has been common practice for a long time in this country to ground the secondary circuits and cases of most instrument transformers used in switching stations, substations and generating stations and in certain other types of installatio...
AIEE Standard for Automatic Circuit Reclosers for A-C Distribution Systems
This standard applies to all single or multipole alternating-current automatic circuit reclosers for the nominal voltages from 1,500 to 23,000 volts.
IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
Test procedures and requirements are provided for all indoor and outdoor cable terminations used on alternating-current shielded cables having laminated insulation rated 2.5 kV through 765 kV and extruded insulation rated 2.5 kV through 500...
AIEE Hard Drawn Aluminum Conductors Physical and Electrical Properties
The standards of this section cover the electrical and related properties of standard hard drawn aluminum conductors. The following shall be taken as normal values for standard hard drawn aluminum conductors.
IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems
Recommendations are provided for selection, application, and installation of electrical power, signal, control, data, and specialty marine cable systems on shipboard.