Browse Standards
IEEE Test Procedure for Charging Inductors
Provides standardised methods of determining the electrical parameters of charging inductors used in radar transmitters, linear particle accelerators, and similar equipment, and provides a standard testing procedure.<<ETX xmlns:mml="http://...
IEEE Guide for Protective Relay Applications of Audio Tones over Telephone Channels
Electric, power systems, having outgrown simplicity a long time ago, continue to require more and better protection as the demand for power increases and the need for reliability becomes greater. Protective relaying has met this challenge b...
IEEE Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current Machines
Insulation systems for direct-current machines are classified in accordance with their limiting temperatures as determined by test rather than by chemical composition. The intention is to classify according to the recognized A, B, F, and H ...
IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations - Redline
This recommended practice applies to the application and installation procedures of auxiliary devices in or on electric rotating machines that are employed in hazardous locations classified as Class I, Division 2 and Zone 2 and Class II, Di...
IEEE Standard Methods for Measuring Electromagnetic Field Strength for Frequencies Below 1000 MHz in Radio Wave Propagation
Standard methods for the measurement of electromagnetic field strength in radiowave propagation are described in detail. These are for frequencies below 1000 MHz, and include the standard-antenna method and the standard-field method.
IEEE Standard Test Procedures for Amplifiers and Preamplifiers used with Detectors of Ionizing Radiation
Procedures are given for testing amplifier and preamplifier systems with linear pulse-shaping networks for use with semiconductor, scintillation, and proportional detectors in the spectroscopy of ionizing radiation. The object is to provide...
IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
This standard applies to semiconductor radiation detectors that are used for the detection and high-resolution spectroscopy of charged particles. The measurement techniques described were selected to be readily available to all manufacturer...
IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
This standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety of enclosures and boxes having all dimensions between 0.1 m and 2 m in the radio frequency ran...
IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
Uniform measurement procedures and techniques are provided for determining the effectiveness of electromagnetic shielding enclosures at frequencies from 9 kHz to 18 GHz (extendable to 50 Hz and 100 GHz, respectively) for enclosures having a...
IEEE Recommended Practice for Speech Quality Measurements
The increasing variety of speech transmission systems has created a new problem for communication engineers. This problem consists of the subjective evaluation of the speech quality produced by these systems. For investigators interested on...