Browse Standards
IEEE Standard for High-Voltage Direct-Current (HVDC) Composite Post Insulators
Outdoor and indoor composite station post insulators used in high-voltage direct-current power transmission systems are covered in this standard. The composite station post insulators covered by this standard consist of a load-bearing insul...
IEEE Recommended Practice for Location of Power Line Gap Interference Sources
Procedures are described in this recommended practice that may be used by electric utility companies and others to address complaints of interference caused by power line gap noise to radio, television, and other types of wireless communica...
IEEE Standard for Identification of Contact Wire Used in Overhead Contact Systems
Parameters to be used in the identification of contact wires used in transit systems and electric railways and railroads are defined. The identification of contact wire by metallurgical content, electrical conductivity, and agency ownership...
NACE International and IEEE Joint Standard Practice for Below-Grade Inspection and Assessment of Corrosion on Steel Transmission, Distribution, and Substation Structures
This NACE/IEEE joint standard provides requirements to (1) help electric utilities identify structures that may be at a high risk for below-grade corrosion; (2) excavate and inspect the selected structures; (3) categorize the condition of s...
IEEE Guide for Online Monitoring and Recording Systems for Transient Overvoltages in Electric Power Systems
The guide for the online monitoring and recording system of transient overvoltages in power system is used to regularize its methods, define the concrete structure of recording system for transient overvoltages, and identify the requirement...
IEEE Guide for the Measurement of DC Transmission Line and Earth Electrode Line Parameters
Field testing methodology and techniques are presented for measuring parameters for dc transmission lines and earth electrode lines are discussed in this guide. The topics addressed include the basic requirements of measurement, safety caut...
IEEE Standard for Error Correction Coding of Flash Memory Using Low-Density Parity Check Codes
A two-level code construction scheme for non-volatile memories (NVM) that is based on low-density parity-check codes is specified in this standard. This scheme constructs an auxiliary codeword that encodes a subset of bits from the primary ...
IEEE Guide for Evaluating and Testing the Electrical Performance of Energy Saving Devices
Described in this guide are methods to evaluate and test the electrical performance of energy saving devices (ESDs). Measurement methods that focus on monitoring the power consumed or generated by the observed load or generator without the ...
IEEE Standard for Green Smart Home and Residential Quarter Control Network Protocol
Protocols are provided for measurement and control networks for home and residential quarters so that they can achieve green, smarter functions. The interactive data format between devices and systems-as well as the standardized definitions...
ISO/IEC/IEEE International Standard -- Information technology -- Ubiquitous green community control network -- Security
The enhanced security management function for the protocol defined in IEEE 1888(TM), Ubiquitous Green Community Control Network Protocol, is described in this standard. Security requirements, system security architecture definitions, and a ...