Browse Standards
IEEE Recommended Practice for Block Transfers in CAMAC Systems (Computer Automated Measurement and Control)
The recommended block-transfer algorithms are discussed, and those given in the basic CAMAC specification are described. These algorithms are well established and are supported by existing hardware. Some new algorithms are then discussed. C...
IEEE Standard Techniques for Determination of Germanium Semiconductor Detector Gamma-Ray Efficiency Using a Standard Marinelli (Reentrant) Beaker Geometry
This standard for determination of gamma-ray efficiencies of germanium semiconductor detectors was developed in recognition of the increasing number of large-volume, low-activity samples being measured by gamma-ray spectroscopy. The standar...
IEEE Guide for Alarm Monitoring and Reporting Systems for Fossil-Fueled Power Generating Stations
This guide provides guidelines for the organization of fossil-fueled power generating plant alarm and monitoring information into types and categories, taking into consideration information usefulness and limitations. This guide further ser...
IEEE Standard Multiple Controllers in a CAMAC Crate (Computer Automated Measurement and Control)
A method for incorporating more than one source of control into a CAMAC crate is defined. The aim is to provide for the use of auxiliary controllers in order to extend the capabilities and fields of application of the CAMAC modular instrume...
IEEE Draft Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement
Specification and test requirements for a non-gyroscopic inertial angular sensor which may measure angular jerk, acceleration, rate or displacement with or without response down to zero frequency. A standard specification format is provided...
IEEE Recommended Practice for Electrical Heating Applications to Melting Furnaces and Forehearths in the Glass Industry
The provisions of this recommended practice apply to (a) All electrical equipment and wiring between the point of connection in the power supply substation and the connection to the furnace or forehearth electrodes for the purpose of heatin...
IEEE Design Guide for Electric Power Service Systems for Generating Stations - Redline
This guide applies to station service systems that supply electric power to auxiliary loads for electric power generating stations. The discussions and recommendations in this guide provide the practices, criteria, and range of system param...
IEEE Guide for Generating Station Grounding
Grounding practices that have generally been accepted by the electric utility industry as contributing to effective grounding systems for personnel safety and equipment protection in generating stations are identified. A guide for the desig...
IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors
The current methodologies, including apparatus, procedures, and measurement accuracies, for determining the dynamic characteristics of vibration dampers and damping systems are described. Some basic guidance is provided regarding a given me...
IEEE Standard Terminology for Semiconductor Memory
Guidelines under which data sheets for new semiconductor memories are to be generated are provided. Adherence to these guidelines is intended to produce data sheets that are concise and that consistently define the operation and characteris...