Browse Standards
IEEE Standard for Test Access Architecture for Three-Dimensional Stacked Integrated Circuits
IEEE Std 1838 is a die-centric standard; it applies to a die that is intended to be part of a multi-die stack. This standard defines die-level features that, when compliant dies are brought together in a stack, comprise a stack-level archit...
NACE International and IEEE Joint Standard Practice for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems
This standard was prepared to assist personnel responsible for maintenance painting of above-grade electrical support structures for electric utilities and large industrial facilities. The standard provides procedures to (1) assess structur...
IEEE Standard for Technology Supervision Code for Wind Turbine Rotor Systems
As a significant part of wind turbine, the rotor system of wind turbine has the functions of transforming wind energy, and balancing power, load and noise, it is critical to the wind turbine safety and economical operation. A rotor system c...
IEEE Guide for Design of Direct Current Overhead Contact Systems for Transit Systems
The general parameters used in the design of direct current overhead contact systems used in transit systems are defined in this guide. The guidelines mentioned in this document are intended to be used for the design of either new or expand...
IEEE Guide for Conducting Corona Tests on Hardware for Overhead Transmission Lines and Substations
Uniform procedures for the testing of transmission line and station bus hardware in high voltage laboratories are established in this guide. Two tests are described: the first is a visual corona test, the second is a radio interference volt...
IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
Electrical and control design of water conveyance facilities associated with hydroelectric projects including associated penstocks, valves, and gates are described in this guide. Guidance to plan and prepare designs is included. Installatio...
IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW - Redline
Open system interfaces for high power electronics equipment used in zonal electrical distribution systems rated above 100 kW are identified in this standard. The required power, monitoring, information exchange, control, and protection inte...
IEEE Guide on the Selection of Transmission and Distribution Insulators with Respect to Cold Weather Conditions
Procedures for selecting external insulation that is likely to be subjected to an outdoor environment that includes combinations of contamination, ice, snow, or cold fog are specified by this guide. The selection methods are applicable to i...
IEEE Standard for Risk-Informed Categorization and Treatment of Electrical and Electronic Equipment at Nuclear Power Generating Stations and Other Nuclear Facilities
This standard addresses the following: Risk-informed methods have been established to appropriately categorize components as either safety significant or low safety significant. Application of these methods has been shown to be safety-benef...
IEEE Draft Recommended Practice for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
Considered in this guide are the components of both the ac and dc systems and the provided guidelines and recommendations for designing the appropriate systems for the substation under consideration. This guide includes the low-voltage auxi...