Browse Standards
IEEE Standard Methods for Measuring Transmission Performance of Telephone Handsets and Headsets
Practical methods for measuring the transmission characteristics of telephone handset or headset by means of using a test connection to obtain objective measurements are provided. The obtained test results may be used as a means of evaluati...
IEEE Draft Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Facilities
Guidelines for assessing, monitoring, and mitigating aging degradation effects on electrical equipment used in nuclear facilities are provided. This guide also includes informative annexes on aging mechanisms, environmental monitoring, cond...
IEEE Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities
Guidance on the planning and design of dc links terminating at ac system locations having low Guidance on the planning and design of dc links terminating at ac system locations having lowshort-circuit capacities relative to the dc power inf...
IEEE Standard for Flame-Propagation Testing of Wire and Cable - Redline
Standardization of cable flame propagation testing is beneficial to cable manufacturers, distributors, and users. Uniform procedures; consistent, repeatable results; and measurable test acceptance criteria are required to allow comparisons ...
IEEE Standard for a Simple 32-Bit Backplane Bus: NuBus
Withdrawn Standard. Withdrawn Date: Mar 06, 2000. No longer endorsed by the IEEE. A simple, high-performance (37.5 Mbyte/s) backplane bus that provides the functions required by multiprocessor systems is defined. NuBus is a synchronous (10 ...
IEEE Standard for Electrical Characteristics of Backplane Transceiver Logic (BTL) Interface Circuits
The proper treatment of the electrical elements of the backplane that provides a physical and electrical connection between different modules in a computer system is covered. Techniques for measuring impedance, capacitance, and crosstalk ar...
IEEE Standard for Backplane Electrical Performance
The proper treatment of the electrical elements of the backplane that provides a physical and electrical connection between different modules in a computer system is covered. Techniques for measuring impedance, capacitance, and crosstalk ar...
IEEE Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators
Guidelines for the measurement and specification of environmental sensitivities of frequency standards and references are presented, including considerations specific to a variety of atomic and mechanical frequency sources.
IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications - Redline
This guide describes methods for selecting the appropriate type of valve-regulated, immobilized-electrolyte, recombinant lead-acid battery for any of a variety of stationary float applications. The purpose of this document is to ensure that...
IEEE Draft Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
This recommended practice is limited to maintenance, test schedules, and testing procedures that can be used to optimize the life and performance of valve-regulated lead-acid (VRLA) batteries for stationary applications. It also provides gu...