Browse Standards
IEEE Guide for Terrestrial Photovoltaic Power System Safety
The design, equipment applicability, and hardware installation of electrically safe, stand- alone, and grid-connected PV power systems operating at less than 50 kW output are addressed. Storage batteries and other generating equipment are d...
IEEE Guide for Aeolian Vibration Field Measurement of Overhead Conductors
Current practices related to field measurements of aeolian vibration of overhead conductors are covered in this guide.
IEEE Guide for Electric Power Distribution Reliability Indices - Redline
Distribution reliability indices and factors that affect their calculations are defined in this guide. The indices are intended to apply to distribution systems, substations, circuits, and defined regions..
IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
This guide is applicable to all stand-alone photovoltaic (PV) systems where PV is the only charging source. Stand-alone PV system parameters and operating conditions are discussed in relation to battery characteristics and expected system p...
IEEE Recommended Practice for Evaluating Electric Power System Compatibility With Electronic Process Equipment
A standard methodology for the technical and financial analysis of voltage sag compatibility between process equipment and electric power systems is recommended. The methodology presented is intended to be used as a planning tool to quantif...
IEEE Standard for Synchrophasors for Power Systems
This standard defines synchronized phasor measurements used in power system applications. It provides a method to quantify the measurement, tests to be sure the measurement conforms to the definition, and error limits for the test. It also ...
IEEE Guide for Installation of Cable Using the Guided Boring Method
Withdrawn Standard. Withdrawn Date: Feb 06, 2006. The method and equipment involved in proper and economical installation of insulated conductors and/or conduits using the guided boring method are covered. The method addresses installations...
IEEE Standard Reliability Program for the Development and Production of Electronic Products
A standard set of reliability program objectives for use between customers and producers, or within product development teams, to express reliability program requirements early in the development phase of electronic products and systems is ...
IEEE Recommended Practice for Reporting Field Failure Data for Power Circuit Breakers
A format is presented that provides a concise and meaningful method for recording pertinent information on power circuit breaker field failures. It is recommended that this format be utilized in record keeping and directing corrective actio...
IEEE Guide for the Application of Insulation Coordination - Redline
The calculation method for selection of phase-to-ground and phase-to-phase insulation withstand voltages for equipment is presented. Methods for insulation coordination of different air-insulated systems like transmission lines and substati...