Browse Standards
IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods
This recommended practice defines many common parameters for ac-dc and dc-dc electronic power distribution components and subsystems. This enables electronic system engineers, manufacturers, and researchers to speak with a common language a...
IEEE Recommended Practice for Qualification of Concentrator Photovoltaic (PV) Receiver Sections and Modules
The minimum tests and inspections required to evaluate photovoltaic concentrating modules, and a common approach (e.g., between producer and purchaser) in conducting qualification tests are provided.
IEEE Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kV
This guide covers specific methods of failure mode classifications and analysis for shielded power cables rated 5 kV through 46 kV.
IEEE Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV Through 46 kV
This guide applies to the process of investigating, evaluating, and analyzing field failures. This guide covers the overall format for failure analysis and subsequent guides will specifically address cables, joints, terminations and separab...
IEEE Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Benchtop Test Requirements Utilizing IEEE 1505(TM) Receiver Fixture Interface Standard
Portable/benchtop test equipment applications are supported in this document by defining a mass interconnection scheme and pin configuration based upon IEEE Std 1505(TM)-2010 and IEEE Std 1505.1(TM)-2015. Particular emphasis has been placed...
IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505 - Redline
An extension to the IEEE 1505TM receiver fixture interface (RFI) standard specification is provided in this standard. Particular emphasis is placed on defining within the IEEE 1505 RFI standard a more specific set of performance requirement...
IEEE Recommended Practice for Radar Cross-Section Test Procedures
The process of the measurement of the radar cross section of objects using a test range is described in this recommended practice. The term radar cross section (RCS) is defined, and the characteristics of different types of test ranges are ...
IEEE Standard Testability Method for Embedded Core-based Integrated Circuits - Redline
A mechanism for the test of core designs within a system on chip (SoC) is defined. This mechanism is a hardware architecture and the core test language (CTL) is leveraged to facilitate communication between core designers and core integrato...
IEEE Guide for Evaluation of Solvents Used for Cleaning Electrical Cables and Accessories
Test procedures for evaluating the physical characteristics of cable-cleaning solvents and their compatibility with extruded dielectric cable components and cable accessories (joints and terminations) are provided in this guide. Compatibili...
IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications - Redline
Operational parameters that may be observed by battery monitoring equipment used in stationary applications and the relative value of such observations are discussed in this guide. Although a list of commercially available systems is not gi...